Below are the instructions for the OG Strap
You will need an 8 millimeter wrench and 3 millimeter allen
Step 1
Fold the MonkeyFeet downwards
Step 2
Use your tools to loosen the strap on the left side of the MonkeyFeet
Remove the bolt, nut, and washer. Set aside for later use
Step 3
Remove the strap from the front padded part
Now insert the new OG Strap, into the front padded part
Step 4
Insert bolt and place into whichever length hole is desired. Next, add the washer and then the nut
Use your hand to get the nut started threading onto the bolt
Step 5
Tighten until the nut firmly bottoms out on the metal bolt
Make sure to not over-tighten the nut