Installation Guide - XL Strap Kit

Below are the instructions for the XL Strap Kit
Please contact us if you have any issues using your new products, enjoy!
You will need an 8 millimeter wrench and 3 millimeter allen

 

Step 1

Fold the MonkeyFeet downwards

Step 2

Use your tools to loosen the strap on the left side of the MonkeyFeet

Remove the bolt, nut, and washer. Set aside for later use

Step 3

Remove strap from the front padded part

Now insert the new XL Ridged Strap, into the front padded part

Step 4

Insert bolt and place into whichever length hole is desired. Next, add the washer and then the nut

Use your hand to first slightly thread the nut

Step 5

Tighten until the nut firmly bottoms out on the metal bolt

Make sure to not over-tighten the nut

Step 6

We will now be removing the ratchet side

Remove the bolt, nut, and washer. Set aside for later use

Step 7

Replace ratchet strap with new XL ratchet strap

Step 8

Insert bolt and place into whichever length hole is desired. Next, add the washer and then the nut

Use your hand to first slightly thread the nut

Step 9

Tighten until the nut firmly bottoms out on the metal bolt

Make sure to not over-tighten the nut

 

You are all set! Enjoy your new MonkeyFeet exercises!